Inverter DC TIG Welding Machine-GT-200
詳細介紹:
Product:Inverter DC TIG Welding Machine | ||
Model | GT-200 | FT-200P |
---|---|---|
Rated Output Current | 5-200A | 5-130(110V) / 5-200(220V) |
Rated Duty Cycle | 25%(10Min.) | 40%(10Min.) |
Dimension | 360 x 172 x 274MM | 211 x 400 x 240MM |
Weight | 10KG | 12.5KG |
產品特性 |
低能源耗損、外型輕巧可攜帶、穩定的出火源、反應迅速。平滑的焊接表面和滲透表現、軟硬弧皆可適用、脈衝功能。
應用範圍 |
可廣泛使用在不銹鋼,碳鋼,合金鋼,銅,鈦等等器材上。使用設備用途廣泛、例如機器製作,汽車產業、輸管業等等。
產品規格 |
MODEL | GT-200 | FT-200P | |
---|---|---|---|
Rated Input Voltage | V(either) | 220(+20%, -15%) | 110/220 or 220(+23%, -18%) |
Rated Input Phase | Phase | 1Ø | 1Ø |
Rated Frequency | HZ | 50 / 60 | 50 / 60 |
Input at Rated Load | KVA | 7.5 | 4.0(110V) 7.5(220V) |
No-Load Voltage | V | 100 | 100 |
Rated Output Voltage | V | 18 | 15.2/18 |
Rated Output Current | A | 5-200 | 5-130(110V) 5-200(220V) |
Pre-Flow Time | Sec. | 0.1 | 0.1 |
Post-Flow Time | Sec. | 1.1-5 | 1.1-10 |
Start Current | A | 5-200(Option) | 5-200 |
Crater Current | A | 5-200(Option) | 5-200 |
Pulse Current | A | 5-200(Option) | 5 |
Down Slop Time | Sec. | 0.02-5.5(Option) | -- |
Pulse Frequency | Hz | Hi:14-500 Low:0.6-22(Option) | Hi:10(5-30) Low:1(0.5-3) |
Pulse Width | % | 20-80(Option) | 50 |
Crater Control | -- | CRATER / REPEAT(Option) | CRATER REPEAT |
Remote Controller | -- | Option(15CM)(Option) | -- |
Rated Duty Cycle | % | 25 | 40 |
Dimension(W×D×H) | mm | 360×172×274 | 211×400×240 |
Weight | KG | 10 | 12.5 |